All Geared Lathe Machine

Products Lathe Machines All Geared Lathe Machine

We bring to customers the highly distinct all geared lathe machine which can not be procured from anywhere else in the market. The heavy duty all geared lathe machine that we provide is highly durable and highly safe to be operated upon. These machines have made a mark in the market with their supreme performances. All these features have made us one of the most demanded all geared lathe machine suppliers.

All Geared Lathe Machine

Specifications	SAG-A	SAG-B	SAG-C	SAG-D	SAG-E	SAG-F
Lenght of Bed	1670 (5'6")	2130 (7')	2740 (9')	3040 (10')	3650 (12')	4260 (14')
Max. admit between centres	555	1015	1625	1925	2535	3145
Width of Bed	323	323	323	323	323	323
Height of Centre/Optional	254/305	254/305	254/305	254/305	254/305	254/305
Max. Swing over Bed dia./Optional	480/531	480/531	480/531	480/531	480/531	480/531
Max. Swing without gap dia./Optional	785/836	785/836	785/836	785/836	785/836	785/836
Max. over Cross Slide dia./Optional	285/336	285/336	285/336	285/336	285/336	285/336
Width of gop in front of Face Plate	205	205	205	205	205	205
Hole of Spindle	52	52	52	52	52	52
Taper in Tail Stock Spindle	MT- 4	MT- 4	MT- 4	MT- 4	MT- 4	MT- 4
Taper in main Spindle nose	MT- 6	MT- 6	MT- 6	MT- 6	MT- 6	MT- 6
Lead Screw dia. & Pitch	38 (4TPI)	38 (4TPI)	38 (4TPI)	38 (4TPI)	38 (4TPI)	38 (4TPI)
No. of Inch Threads & Range	24(2-30TPI)	24(2-30TPI)	24(2-30TPI)	24(2-30TPI)	24(2-30TPI)	24(2-30TPI)
No. of Metric Threads & Range	12(0.5-6mm)	12(0.5-6mm)	12(0.5-6mm)	12(0.5-6mm)	12(0.5-6mm)	12(0.5-6mm)
No.of Spindle Speeds	8 (30-1235RPM)	8 (30-1235RPM)	8 (30-1235RPM)	8 (30-1235RPM)	8 (30-1235RPM)	8 (30-1235RPM)
Power of AC motor (1440 RPM) kw/HP	2.2/3	2.2/3	2.2/3	2.2/3	2.2/3	2.2/3
Approx. weight in kgs.	1400	1500	1600	1800	2000	2200

(All dimensions are in mm)

Headstock is All Geared type located on flat bedways. 8 Spindle speeds are obtained by the help of 2 levers conveniently located. With the help of these levers spindle speeds are obtained in steps of 30 to 1235 RPM. Headstock gears are made out of special alloy steel and are hardened & profile ground. These gears are mounted on hobbed spline shafts and run in oil bath. Reversible type oil pump is fitted for lubrication.

The main spindle is made of high tensile steel and is induction hardened & ground. This is rigidly mounted on 2 precision Taper Roller Bearings. Oil Glass Windows are provided to check oil level and to check the output of oil pump.

Bed is inverted "V" type and deep in section which is made of close grained cast iron with diagonal webs to withstand torsional strains. The bed is strongly braced with cross ribs which provides a rigid frame work to the machine so that initial accuracy of the machine is maintained throughout its life. The lathe bed is Hardened & Ground with hardness of minimum 350 BHN

Carriage is mounted on invert "V" and flat guide way of the bed. Carriage is wide enough to have a maximum bearing surface with rigid tool support. The slides are accurately scrapped. This carries the cross slide and the compound rest with a 4-way indexing tool post. Wipers are fitted to prevent chips entering underneath. The operating screws are fitted with friction grip micrometer dials. A dial indicator is provided to facilitate easy engagement of the lead screw for thread cutting.

Apron is double wall oil bath type designed with independent drive motion for feeds and screw cutting with interlocking arrangements. Worm and Worm Gear is used to engage auto feed for surfacing and sliding. Gun Metal Bush is fitted on Worm to decrease wear and tear. All gears, bearings and the worm are lubricated in the oil sup provided.

Tailstock moves on "V" and flat guideway of the bed. Cross movement is incorporated for turning of slight tapers. The hardened & ground tailstock spindle is made from EN-8 Steel with internal grinding having MT-4 taper.

Standard Features:-

Hardened & Ground Bedways, Norton Gear Box, Dog Chuck Plate, True Chuck Plate, Centre Adaptor, Dead Centres-2 nos., Tool Post Spanner, Electrical (Motor & Starting Switch) & Oil Can.

Extra Accessories:-
Steady Rest, Follow Rest, Rear Tool Post, Face Plate, Rear Splash Guard, Coolant System, Machine Lamp, Chucks, Taper Turning Attachment, Hydraulic / Mechanical Copy Turning Attachment and any Special Attachment as per customer's requirement.

Design, Colours, Specification & Weight are Subject to Change without any Prior Notice